RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 63)

- 63 -
18.1. Use of database of products in dosing process
When weighing, it is possible to use the value of target mass assigned to a
product in the database of products or temporarily determine custom target
values of mass. In the database of products, target mass of a product is its
mass field.
PROCEDURE 1 – Selection of product from Database of Products
•
Press < Database of Products> quick access key
•
Using list of products select one to be weighed
•
Automatically, in the grey workspace the target value and the tolerance
value are displayed
•
The display indicates the negative value of the target value
•
Under the measurement result there is bargraph displayed. Colour of the
bargraph corresponds to the current status of mass :
o
Yellow bargraph’s colour: mass value below the Target Value –
Tolerance
o
Green bargraph’s colour: mass value within the tolerance field: Target
Value +/- Tolerance
o
Red bargraph’s colour: mass above the Target Value + Tolerance