RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 130)

- 130 -
27.8. Pipettes
Database of Pipettes contains records and specification on pipettes to be
calibrated.
Procedure
•
Enter submenu < Databases>, and press < Pipettes> field
•
Press < Add > soft key should a new pipette be added,
•
If a pipette already exists in the database of pipettes, press field with its
name to enter its specification which is optionally configurable.
List of parameters defined on a pipette:
1. Name
2. Code
3. Model
4. Tip
5. Type of volume
6. Nominal volume
7. Minimal volume
8. Number of channels
9. Type
10. Tested volumes