RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 152)

- 152 -
Ensuring correct cooperation between the balance and the ambient conditions
module requires entering module connection address and the baud rate of port
to which the THB module is plugged.
(address and baud rate settings are specified on module data plate).
29.7. Tablet feeder
(
mode not available in balance’s standard version)
Balance 3Y series enables communicating it with an automatic feeder PA-02/H
series using ports:
• RS 232 (COM1),
• RS 232 (COM2),
• Com internal.
Ensuring a correct cooperation with the feeder requires setting an appropriate
address of the device (the address is specified on the data plate of the
automatic feeder, including baud rate parameters).
30. INPUTS / OUTPUTS
Application of inputs:
The set of inputs is used to control balance’s operation. Each of 4 inputs is
connectable to the following functions or keys:
o
Checkweighing thresholds
o
Right door
o
Target value
o
Parameters
o
Profile
o
Statistics
o
Adjustment/Calibration
o
Add to statistics
o
Zero
o
Product
o
Tare
o
Warehouse
o
Set tare
o
Client
o
Disable tare
o
Parts counting: give part mass
o
Restore tare
o
Parts counting: set mass of a single
part
o
Packaging
o
Percent setup: give reference mass
o
Print
o
Percent setup: set 100%
o
Header printout
o
Density of solid
o
Footer printout
o
Density of liquid
o
Universal variable 1 ÷ 5
o
Air density
o
Accept
o
Control mass comparator’s robot
o
Abort
o
Task
o
User
o
Reference standard