RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 88)

- 88 -
22.5. Printouts
Option Printouts enables setting the content of printouts in a standard
printout and also determining non-standard printouts.

Standard printout
Comprises four internal blocks, each featuring different variables. Each
variable can be attributed with parameter YES – i.e. present on a
printout, or NO – i.e. not printed.
Settings for header printout, weighing printout, and footer printout are
specified in point. 15.5; below description refers to setting a printout
template for report on formulation.
A user can design content of a report.
CAUTION:
Data contained in a report and referring to each measurement is set in
option <Weighing printout template>. On each report printout, areas
dedicated for measurements shall be filled with data with attribute <YES>
in the <Weighing printout template>.
Content of each of reports:
− Working mode
− User
− Client
− Warehouse
− Formulation
− Formulation code
− Start date
− End date
− Number of ingredients
− Number of measurements
− Measurements
− Target value
− Sum
− Formulation difference
− Status
− Empty line
− Dashes
− Signature
− Non-standard printout