RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 21)

- 21 -
* - Accessibility of measuring units is conditioned by type of balance and its
verification status.
In non-verified balances all measuring units including those outside the
International System of Units are available.
10.2. Means of correct weighing procedure
In order to ensure long lasting use of a balance, correct and reliable
measurement of weighed loads, follow below procedures:
 Start the balance with no load on the weighing pan
(permissible value of load on the weighing pan on balance start is
±10% of its maximal capacity).

Load the weighing pan steadily avoiding shocks:
YES NO
 Place weighed loads centrally on the weighing pan:
YES NO
 Avoid side loading, in particular side shocks:
NO NO