RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 90)

- 90 -
23. STATISTICS
Working mode< Statistics> enables acquiring data form a series of
measurements and carrying out statistical calculations. The range of statistical
data is conditioned by mode’s internal settings.
Working mode activating procedure
•
while in the main window, press soft key located in the upper bar of the
display, which opens a submenu <Working modes> with selection of
available working modes,
•
select < Statistics> mode, the software automatically returns to the
main window and displays pictogram in the upper bar,
The grey coloured workspace contains the following data:
o
N (no. of samples)
o
SUM (total no. of samples)
o
X (mean value from a series)
o
MIN (minimal value in a series)
o
MAX (maximal values in a series)
o
SDV (standard deviation)
o
RDV (variation coefficient)
On selecting the statistics mode, the display contains the following
quick access keys in the bottom bar:
1. Setup – access to balance’s menu
2. Print header – print of data declared
in the header
3. Print footer – print of data declared
in the footer
4. Database of products – selection of
products from corresponding
database
5. Set tare
6. Statistics
7. Add to statistics