Barco CLM R10+ - Manual (Page 177)

16. Servicing
A
Image 16-5
Slide out lens
16.5 Removal of a lamp unit
W
ARNING
:
This procedure may only be performed by qualified technical service personnel.
C AUTION : Never attempt to disassemble the lamp from its housing or to dispose of it. Due to its high internal
pressure, the lamp may explode in either hot or cold states if improperly handled. For recycling guidelines,
see "Recycling guidelines", page 8.
About the lamps
The projector contains 4 lamps, each of them in a separate lamp house. Each lamp can be individually replaced by a spare lamp.
Each lamp position has a number. That number is also used in the software to identify the parameters of the corresponding lamp.
Lamp 1
Lamp 2
Lamp 3
Lamp 4
Image 16-6
Lamp position
When servicing a projector with exploded lamp
Keep the following warning in mind when servicing a projector with exploded lamp.
R59770021 CLM R10+ 11/10/2010 173