10 installation of the lamp door, Installation of the lamp door – Barco CLM R10+ User Manual
Page 192
Advertising
17. Projector covers, removal and installation
A
B
Image 17-15
Install front cover
C
Image 17-16
Secure front cover
17.10 Installation of the lamp door
Lamp door can only be installed when the top cover is installed.
Necessary tools
Flat screwdriver
How to install the lamp door
1. Place the lamp door with its pins (B) on its sockets (A) and push on it until clicks (image 17-17)
2. Fasten the captive screw at the middle upper side of the side cover on the input side. (image 17-18)
188
R59770021 CLM R10+ 11/10/2010
Advertising