Barco CLM R10+ - Manual (Page 208)

E. Troubleshooting
Error
code Description Error Warning Caused by Action
4198 FPGA PMP init
failed Yes -
6099 Board ID
unkown
version Yes
6098 Board ID
invalid string Yes
7999 DMD temp low Yes Yes Low temperature on DMD turning on the lamp(s) will heat up
the DMD
7998 DMD temp high Yes Yes High temperature on DMD check if air slots are free, clean air
filters.
If problem persists, call a qualified
service engineer.
7997 Ambient temp
low Yes Yes Ambient temperature out of
specifications take measurements to increase the
temperature
7996 Ambient temp
high Yes Yes Ambient temperature out of
specifications check ambient conditions
check if air slots are free, clean air
filter.
7995 TEC temp low
7994 TEC temp high Yes Yes
7992 LPS1 temp
high Yes Yes High temperature on LPS1 check if air slots are free, clean air
filters.
If problem persists, call a qualified
service engineer.
7990 LPS2 temp
high Yes Yes High temperature on LPS2 check if air slots are free, clean air
filters.
If problem persists, call a qualified
service engineer.
7988 LPS3 temp
high Yes Yes High temperature on LPS3 check if air slots are free, clean air
filters.
If problem persists, call a qualified
service engineer.
7986 LPS4 temp
high Yes Yes High temperature on LPS4 check if air slots are free, clean air
filters.
If problem persists, call a qualified
service engineer.
7978 Lamp4 temp
high Yes Yes High temperature on lamp 4 check if air slots are free, clean air
filters.
If problem persists, call a qualified
service engineer.
7924 Fan radiator A
low Yes Yes Fan is running too slow or not at all If problem persists, call a qualified
service engineer
7922 Fan radiator B
low Yes Yes Fan is running too slow or not at all If problem persists, call a qualified
service engineer
7920 Fan outlet A
low Yes Yes Fan is running too slow or not at all If problem persists, call a qualified
service engineer
7918 Fan outlet B
low Yes Yes Fan is running too slow or not at all If problem persists, call a qualified
service engineer
7916 Fan power
supply A low Yes Yes Fan is running too slow or not at all If problem persists, call a qualified
service engineer
7914 Fan power
supply B low Yes Yes Fan is running too slow or not at all If problem persists, call a qualified
service engineer
7912 Fan LPS A low Yes Yes Fan is running too slow or not at all If problem persists, call a qualified
service engineer
7910 Fan LPS B low Yes Yes Fan is running too slow or not at all If problem persists, call a qualified
service engineer
204 R59770021 CLM R10+ 11/10/2010