Barco CLM R10+ - Manual (Page 133)

12. Alignment menu
Overlap : number of pixels that overlap
Horizontal resolution of 1 projector
Total horizontal screen resolution : [(horizontal resolution of 1 projector) x 2] minus overlap.
Horizontal Resolution source : number of active pixels of the source.
How to set for the first projector
1. Go to Layout → Main window → Size
2. Enter the value for the Width as follow: Total horizontal screen resolution / 2 - 0.5 x overlap zone.
3. Position remains the same. (image 12-44, image 12-45, image 12-46, image 12-47)
Image 12-44
Image 12-45
Image 12-46
Image 12-47
How to set for the second projector
1. Go to Layout → Main window → Size
2. Enter the value for the Width as follow: Total horizontal screen resolution / 2 - 0.5 x overlap zone.
3. Position = original start + horizontal width of projector 1 - overlap zone (image 12-48, image 12-49, image 12-50, image 12-51,
image 12-52)
Image 12-48
Image 12-49
Image 12-50
R59770021 CLM R10+ 11/10/2010 129