Barco CLM R10+ - Manual (Page 154)

13. Projector control
The function can be:
•
Auto align (only aligning of the preview window is executed).
• Auto-image menu. This function opens a auto image menu where the user can make his choice between auto align, auto
contrast/brightness and auto phase.
How to configure the Auto button?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select Buttons and press ENTER.
4. Use the ▲ or ▼ key to select APA and press ENTER to toggle between [Align only] and [Auto-image menu]. (image 13-57,
image 13-58, image 13-59)
Image 13-57
Image 13-58
Image 13-59
13.7.2 Shortcut keys
What can be done?
An overview of the shortcut allocations with the corresponding menu is given. Those printed in bold are allocated.
The allocated shortcut keys can be cleared within this menu.
How to clear a shortcut key
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select Buttons and press ENTER.
4. Use the ▲ or ▼ key to select Shortcut keys and press ENTER.
5. Use the ▲ or ▼ key to select a shortcut with allocation and press ENTER to remove the allocation.
The indication becomes No allocation and the key is free again for a new shortcut association. (image 13-60, image 13-61,
image 13-62, image 13-63)
Image 13-60
Image 13-61
Image 13-62
150 R59770021 CLM R10+ 11/10/2010