Barco CLM R10+ - Manual (Page 83)

9. Image menu
Image 9-27
9.3.7 Noise reduction
About Noise reduction
Reduces noise and pixel jitter in all video sources.
How to change?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Image and press ENTER.
3. Use the ▲ or ▼ key to select Image settings and press ENTER.
4. Use the ▲ or ▼ key to select Noise reduction and press ENTER.
The Noise reduction progress bar appears.
5. Use ◄ or ► to change the noise reduction.
The higher the value, the higher the noise reduction. (image 9-28, image 9-29, image 9-30, image 9-31)
Image 9-28
Image 9-29
Image 9-30
Image 9-31
9.3.8 Color temperature
What can be done ?
The color temperature can be selected according to the type of source:
There are 5 different preset color temperatures:
• Projector white
• computer : 9300 K
• Video : 6500 K
• Film : 5400 K
• Broadcast : 3200 K
These calibrated presets can be selected and will provide optimum color tracking, the projector allows however the setting of a
personal color temperature, this is done in custom balance
R59770021 CLM R10+ 11/10/2010 79