Barco CLM R10+ - Manual (Page 120)

11. Lamp menu
11.5 Status and run time overview lamps
Overview
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Lamp and press ENTER.
3. Use the ▲ or ▼ key to select Overview and press ENTER.
The status and the run time for each lamp are displayed. (image 11-11, image 11-12, image 11-13)
Image 11-11
Image 11-12
Image 11-13
11.6 Lamp mode
What can be done?
In 4 lamps mode, the projector will always ignite all 4 lamps.
In 2 lamps mode, the projector will always ignite lamp 1 & 3 or 2 & 4 depending on the current run time. It will always use those with
the lowest run time.
In 1 lamp mode, the projector will always ignite lamp 3 or 4, depending on the current run time. It will always use the lamp with the
lowest run time.
How to change the lamp mode
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Lamp and press ENTER.
3. Use the ▲ or ▼ key to select Lamp mode and press ENTER.
The Lamp mode selection menu is displayed.
4. Use the ▲ or ▼ key to select the desired lamp mode and press ENTER. (image 11-14, image 11-15, image 11-16)
Image 11-14
Image 11-15 Image 11-16
116 R59770021 CLM R10+ 11/10/2010