Barco CLM R10+ - Manual (Page 150)

13. Projector control
Or,
enter a new value with the digit keys on the remote control or local keypad.
6. Use the ◄ or ► key to select the next digit and repeat step 5.
7. When the desired address is entered, press ENTER to store that address. (image 13-38, image 13-39, image 13-40, image 13-41)
Image 13-38
Image 13-39
Image 13-40
Image 13-41
13.6.2 DMX universe
About DMX universe
One DMX universe can contain a limited number of projectors depending on the DMX mode. Only 512 channels can be connected
to one universe. When the number of channels exceed the universe space, a new universe has to be created
How to set the DMX universe
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select DMX and press ENTER.
4. Use the ▲ or ▼ key to select DMX universe and press ENTER.
The edit DMX universe window opens.
5. Use the ▲ or ▼ key to select a new value
Or,
enter a new value with the digit keys on the remote control or local keypad.
6. Use the ◄ or ► key to select the next digit and repeat step 5.
7. When the desired universe is entered, press ENTER to store that universe. (image 13-42, image 13-43, image 13-44, im-
age 13-45)
Image 13-42
Image 13-43
Image 13-44
146 R59770021 CLM R10+ 11/10/2010