Barco CLM R10+ - Manual (Page 185)

17. Projector covers, removal and installation
17. PROJECTOR COVERS, REMOVAL AND
INSTALLATION
Overview
• Removal of the front cover
• Removal of the lamp door
• Removal of the back cover
• Removal of the top cover
• Removal of the side cover
• Installation of the side cover
• Installation of the top cover
• Installation of the back cover
• Installation of the front cover
• Installation of the lamp door
W
ARNING
:
The cover removal procedures may only be performed by qualified technical service personnel.
17.1 Removal of the front cover
Necessary tools
Flat screwdriver
How to remove the front cover
1. Release the captive screw at the middle bottom of the front cover (a) (image 17-1)
2. Release the front cover from the projector doing the following:
a) stand in front of the projector and pull the bottom side of the cover a little toward you (b)
b) In that slightly pivoted position, pull the cover downwards to release it from the top cover (c) (image 17-2)
a
Image 17-1
Release captive screw
R59770021 CLM R10+ 11/10/2010 181