7 removal of an input module, Removal of an input module – Barco CLM R10+ User Manual
Page 180
Advertising
16. Servicing
Image 16-10
Lamp insertion
16.7 Removal of an input module
Necessary tools
Phillips screw driver PH1
How to remove an input module
1. Switch off the projector and unplug the power cord at the projector side.
2. Release the two captive screws of the input module. (image 16-11)
3. Pull out the input module via the two provided knobs.
Image 16-11
Input module removal
176
R59770021 CLM R10+ 11/10/2010
Advertising