F.3 preparing the projector, Preparing the projector – Barco CLM R10+ User Manual
Page 215
F. Mounting optional Carry handle
Image F-4
Remove stacking point construction
F.3
Preparing the projector
C
AUTION
:
Before turning the projector upside down, be sure the stacking points on the top cover are
mounted.
What has to be done?
Before the carry handle can be mounted, the projector feet must be removed and an extra support point must be added.
Necessary tools
•
8 mm Allen wrench.
•
22 mm open-end wrench.
Necessary parts
Back support point.
How to handle?
1. Turn the projector upside down.
2. Remove the 3 feet. First unscrew the foot cap (reference 1) and than loosen the foot adapters (reference 3). Use a 4 mm Allen
wrench to unscrew the hexagon socket head cap screws (reference 2). (image F-5)
3. Insert next to the removed back foot the extra support point (reference 1). Use a 22mm open-end wrench to fasten the extra
support.
Due to its construction, the support is still a bit movable. (image F-6)
R59770021 CLM R10+ 11/10/2010
211