Barco CLM R10+ - Manual (Page 164)

14. Service menu
3. Use the ▲ or ▼ key to select Diagnosis and press ENTER.
The diagnosis screen will be displayed.
4. Use the ▲ or ▼ key to select Error logging and press ENTER.
The Error logging overview menu is displayed.
For more explanation about the stored error message, see "Error codes", page 203. (image 14-32, image 14-33, image 14-34)
Image 14-32
Image 14-33
Image 14-34
14.4 Internal service patterns
How to select
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Internal service patterns and press ENTER.
The internal service pattern window opens.
4. Use the ▲ or ▼ key to select the desired patterns and press ENTER.
When a pattern is selected, press ENTER to toggle to other patterns of the selected type. Press EXIT to return to the internal
service pattern menu. (image 14-35, image 14-36, image 14-37)
Image 14-35
Image 14-36
Image 14-37
14.5 Restore factory defaults
What can be done?
All settings of the projector will be set to the original factory settings with the exception of the IP address, serial settings, DMX settings
and High altitude mode. For these settings the choice exists to exclude them in the reset operation. .
How to make an exception
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
160 R59770021 CLM R10+ 11/10/2010