Barco CLM R10+ - Manual (Page 200)

C. DMX Chart
Chan-
nel Function Type Range Default Action Comments
0 - 31 Stop
31 - 63 Run
64 - 95 Future assignment Same as Stop
96 -
127 Future assignment Same as Stop
128 -
159 Future assignment Same as Stop
160 -
191 Future assignment Same as Stop
192 -
223 Future assignment Same as Stop
6 Motor Go >>
224 -
255 Activates Function Channels
Command Held for 5 seconds
0 - 31 Stop
31 - 63 Run
64 - 95 Future assignment Same as Stop
96 -
127 Future assignment Same as Stop
128 -
159 Future assignment Same as Stop
160 -
191 Future assignment Same as Stop
192 -
223 Future assignment Same as Stop
7 Motor Go <<
224 -
255 Activates Function Channels
Command Held for 5 seconds
8 White peaking 0 - 255 100 - 0% Inverted to avoid bad reproduction, action
needed to remove white peaking.
0 - 26 0 100% Inverted to avoid bad reproduction, action
needed to dim down the power.
27 - 52 98%
53 - 79 96%
80 -
105 94%
105 -
131 91%
132 -
157 89%
158 -
183 86%
184 -
209 84%
210 -
235 82%
9 Lamp Power
236 -
255 80%
10 Free 0 - 255 Reserved for Future expansion
C.2 CLM control channel mapping (Basic mode)
Overview
Chan-
nel Function Type Range Default Action Comments
1 Dimmer Xfade0 - 255 0 - 100%
196 R59770021 CLM R10+ 11/10/2010