Barco CLM R10+ - Manual (Page 139)

12. Alignment menu
Image 12-74
Image 12-75
DLP leakage area
1 Overlap area
2 DLP Leakage area
How to adjust
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Alignment and press ENTER.
3. Use the ▲ or ▼ key to select ScenergiX and press ENTER.
4. Use the ▲ or ▼ key to select Black level and press ENTER. (image 12-76, image 12-77, image 12-78, image 12-79)
5. Adjust the black level of area A until the black level of area A, B and C are equal. Use the Adjust function All, Red, Green and
Blue in the Black level menu. (image 12-80)
R59770021 CLM R10+ 11/10/2010 135