7 installation of the top cover, 8 installation of the back cover, Installation of the top cover – Barco CLM R10+ User Manual
Page 190: Installation of the back cover
Advertising
17. Projector covers, removal and installation
Image 17-11
Fixate side cover
17.7 Installation of the top cover
How to install
1. Place the top cover on the projector and push on the front side and back side of the cover until it clicks into its locks (4 locks).
2. Secure the cover by turning the captive screw clockwise.
Image 17-12
Mount top cover
17.8 Installation of the back cover
How to install
1. Hook the back cover on the top and side covers so that the edges of all three covers are fixed in the back cover. No open space
allowed between two covers. (image 17-13)
2. Secure this position by turning the 3 captive screw clockwise. (image 17-14)
Image 17-13
Mount back cover
186
R59770021 CLM R10+ 11/10/2010
Advertising