Barco CLM R10+ - Manual (Page 109)

10. Layout menu
Image 10-25
Image 10-26 Image 10-27
When PIP is activated (ON state), the PIP window becomes the active window. Switching to the main window
is still possible with the window button on the RCU.
10.3.3 Picture in Picture source selection
What can be done ?
The input source for the picture in picture window can be selected.
How to select a source
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Window and press ENTER.
3. Use the ▲ or ▼ key to select PIP Window and press ENTER.
The PIP window dialog opens.
4. Use the ▲ or ▼ key to select Source and press ENTER.
The source selection window opens.
5. Use the ▲ or ▼ key to select the desired source and press ENTER to activate this source. (image 10-28, image 10-29, im-
age 10-30, image 10-31)
Image 10-28
Image 10-29 Image 10-30
Image 10-31
R59770021 CLM R10+ 11/10/2010 105