Lenze E94AxHE Technology Application Synchronism - Manual (Page 69)

EDS94TA10040xxxx EN 1.1 - 10/2008
L
69
9400 Technology applications | Synchronism with mark synchronisation
Parameter setting & configuration
Parameterisable function blocks
4.14.19 MonitFollowError
4.14.20 MotionBusIn
C03874 Set position reached
• Display of output signal
bInTarget.
0 Set position not yet reached.
1 Set position reached.
Parameter Possible settings Information
Is an instance of Function
L_LdMonitFollowError Following error monitoring
Parameter Possible settings Information
C03960 -214748.3647 unit 214748.3647 Following error at the input
• Display of input signal
dnFollowErrorIn_p in real unit of
the machine.
C03961 String of digits Position unit
• Read only
C03963 Following error out of tolerance
• Read only
FALSE Following error smaller than set
switching threshold
TRUE Following error larger than set
switching threshold
C03964 Following error monitoring activated
• Read only
FALSE Deactivated
TRUE Activated
Is an instance of Function
L_LdExtrapolate Optional extrapolation of the position information received via a bus system in
order to compensate for larger bus transmission cycles.
 Master value source: Bus system (C 31)
Parameter Possible settings Information
C03550 1 127 Number of extrapolation cycles
• Initialisation: 1
C03551/1 String of digits Position unit
• Read only
C03551/2 String of digits Speed unit
• Read only
C03557 -214748.3647 unit/t 214748.3647 Speed at the output
• Read only
• Is generated from the speed
signal dnSpeedOut_s.
C03558 -214748.3647 unit 214748.3647 Position at the output
• Display of the dnPosOut_p output
signal in the real unit of the
machine.