Rockwell Automation 1403-NDNET DeviceNet Communications Card Installation Instructions - Manual (Page 122)

Publication 1403-IN054B-EN-P - August 2001
B-92 DeviceNet Data Tables
Instance 2 Attributes (Predefined Master/Slave Polled I/O
Message Connection)
14 Get Produced Connection Path Array of USINT null (no data)
15 Get Consumed Connection Path
Length UINT 0
16 Get Consumed Connection Path Array of USINT null (no data)
17 Get Production Inhibit TIme UINT 0
Attribute ID Access Rule Name DeviceNet Data
Type Data Value
Attribute ID Access Rule Name DeviceNet Data Value
1 Get State USINT 0=nonexistent 1=configuring
(default) 2=waiting for
connection ID 3=established
4=timed out 5=deferred delete
2 Get Instance Type USINT 1=I/O message
3 Get Transport Class Trigger Byte 0x82 or 0x83
4 Get Produced Connection ID UINT 01111xxxxxx
xxxxxx=node address
5 Get Consumed Connection ID UINT 10xxxxxx101
xxxxxx=node address
6 Get Initial Comm Characteristics Byte 0x01
7 Get Produced Connection Size UINT 8
8 Get Consumed Connection Size UINT 4
9 Get/Set Expected Packet Rate UINT 0 default
12 Get Watchdog Timeout Action USINT 0=timeout (default) 1=auto
delete 2=auto reset
13 Get Produced Connection Path
Length UINT 6
14 Get Produced Connection Path
LogicalSegment, Class
Class Number
Logical Segment, Instance
Instance Number
Logical Segment, Attribute
Attribute Number Array of:
USINT
0x20
0x04
0x24
0x01
0x30
0x03
15 Get Consumed Connection Path
Length UINT 6
16 Get Consumed Connection Path
Logical Segment,Class
Class Number
Logical Segment, Instance
Instance Number
Logical Segment, Attribute
Attribute Number Array of:
USINT
0x20
0x04
0x24
0x02
0x30
0x03
17 Get Production Inhibit Time UINT 0