Rockwell Automation 1403-NDNET DeviceNet Communications Card Installation Instructions - Manual (Page 4)

Publication 1403-IN054B-EN-P - August 2001
Table of Contents ii
Instance 8 Attributes (Advanced
Configuration Data Read) . . . . . . . . . . . . . . . . . . . . . . B-11
Instance 9 Attributes (DeviceNet
Communication Configuration Write) . . . . . . . . . . . . . B-13
Instance 10 Attributes (DeviceNet Communication
Configuration Read) . . . . . . . . . . . . . . . . . . . . . . . . . . B-14
Instance 11 Attributes (Metering voltage, current, and
frequency results) . . . . . . . . . . . . . . . . . . . . . . . . . . . B-14
Instance 12 Attributes (Sequence voltages and currents) B-16
Instance 13 Attributes (Metering power results) . . . . . . B-17
Instance 14 Attributes (Metering power factor results) . B-18
Instance 15 Attributes (Metering real energy results) . . B-19
Instance 16 Attributes (Metering reactive energy results) B-20
Instance 17 Attributes (Metering demand results). . . . . B-21
Instance 18 Attributes (Metering perdicted
demand results) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-21
Instance 19 Attributes (Master module selftest results) . B-22
Instance 20 Attributes (Setpoint setup/readback select) B-24
Instance 21 Attributes (Setpoint configuration read). . . B-25
Instance 22 Attributes (Setpoint status information) . . . B-26
Instance 23 Attributes (Snapshot
configuration/readback record select) . . . . . . . . . . . . . B-27
Instance 24 Attributes (Read of snapshot
configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-28
Snapshot log record parameter list . . . . . . . . . . . . . . . B-30
Instance 25 Attributes (Voltage & Current
Snapshot data). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-31
Instance 26 Attributes (L4, Unbalance & Frequency
Snapshot data). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-32
Instance 27 Attributes (Power Snapshot data) . . . . . . . B-33
Instance 28 Attributes (Power Factor Snapshot data) . . B-34
Instance 29 Attributes (Min/max
configuration/readback parameter select) . . . . . . . . . . B-35
Instance 30 Attributes (Read of Min/max
configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-37
Instance 31 Attributes (Min/Max log results) . . . . . . . . B-37
Instance 32 Attributes (Event log
configuration/readback log select) . . . . . . . . . . . . . . . B-38
Instance 33 Attributes (Read of Event
log configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . B-39
Instance 34 Attributes (Event log results). . . . . . . . . . . B-39
Instance 35 Attributes (Oscillography
configuration/readback data select) . . . . . . . . . . . . . . B-40
Instance 36 Attributes (Oscillography
Configuration Read) . . . . . . . . . . . . . . . . . . . . . . . . . . B-42
Instance 37 Attributes (Oscillography data) . . . . . . . . . B-43