Rockwell Automation 1403-NDNET DeviceNet Communications Card Installation Instructions - Manual (Page 48)

Publication 1403-IN054B-EN-P - August 2001
B-18 DeviceNet Data Tables
Instance 14 Attributes (Metering power factor results)
Assembly Structure
Common Services
Attribute ID Access
Rule
Name DeviceNet Data Type
3 Get Data Structure of
50 bytes (25 Words)
Param # Parameter name Data type #bytes Master Module Range Word
No.
1 L1 true power factor Float 4 –100.0 to +100.0 1
2
2 L2 true power factor Float 4 –100.0 to +100.0 3
4
3 L3 true power factor Float 4 –100.0 to +100.0 5
6
4 3-phase true power factor Float 4 –100.0 to +100.0 7
8
5 L1 displacement power factor Float 4 –100.0 to +100.0 9
10
6 L2 displacement power factor Float 4 –100.0 to +100.0 11
12
7 L3 displacement power factor Float 4 –100.0 to +100.0 13
14
8 Total displacement power factor Float 4 –100.0 to +100.0 15
16
9 L1 distortion power factor Float 4 0.0 to +100.0 17
18
10 L2 distortion power factor Float 4 0.0 to +100.0 19
20
11 L3 distortion power factor Float 4 0.0 to +100.0 21
22
12 3-phase distortion power factor Float 4 0.0 to +100.0 23
24
13 Metering iteration Int 2 Used by external device to determine if it has
new metering data. Counts from 0 to 32767,
then rolls over to 0. 25
Service
Code Service Name
0Ehex Get_Attributes_Single