Rockwell Automation 1403-NDNET DeviceNet Communications Card Installation Instructions - Manual (Page 135)

1 Publication 1403-IN054B-EN-P - August 2001
Appendix
D
Technical Specification
Product Approvals UL 508 Component Recognized File E96956 and CSA C22.2 approval
for Industrial Control Equipment.
Compliance to European
Union Directives If this product has the CE mark, it is approved for installation within
the European Union and EEA regions. It has been designed and tested
to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
electromagnetic Compatibility (EMC) and the following standards:
•
EN 50081-2 - Generic Emission Standard, Part 2 - Industrial
Environment (Class A).
•
EN 50082-2 - Generic Immunity Standard, Part 2 - Industrial
Environment.
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low
Voltage, by applying the safety requirements of IEC 1010-1.
This equipment is classified as open equipment and must be installed
(mounted) in an enclosure during operation as a means of providing
safety protection.
Specifications
Table D.1 Screw Torque and Wire Size
Position Ratings
Mounting Screw Tightening Torque 0.9 to 1.1 Nm (8 to 10 lb-in)