The 9/440 resolver–based cnc/drive system, 5a.0, 5a.1 – Rockwell Automation 8520 9/Series Hardware TAB 5 User Manual
Page 3
Section
5A
5A-1
The 9/440 Resolver–based
CNC/Drive System
The 9/440 Resolver–based CNC/Drive system is a unique machining
solution that incorporates a CNC with a digital drive as a single cohesive
unit. This system improves machine performance as well as decreasing
cost, system integration time and cabling. The 9/440 Resolver–based
CNC/Drive supports up to four closed loop axes and two closed loop
analog systems (typically spindles).
This system is designed to interface to Allen-Bradley 1326 digital servo
motors.
The following figure shows some of the key features of the
9/440 Resolver–based CNC/Drive:
9/440 Resolver–based
System Module
Status LED
(system module)
Slider Interconnect
with Termination Panel
Status LED
(axis module)
Axis Modules
Motor Power & Ground
Connections
5A.0
Section Overview
5A.1
Hardware Overview