31er40xx, 31et40xx, 240er40xx – Rockwell Automation GV3000/SE AC Drive ControlNet Network Communication Board, M/N 2CN3000 User Manual

Page 46: 240et40xx, 430er40xx, 430et40xx, 38er40xx, 38et40xx, 300er40xx, 300et40xx

Advertising
background image

2-34

GV3000/SE AC Drive ControlNet Network Communication Option Board

2.8

Installing the ControlNet Option Board in 2 to 43 Amp
GV3000/SE Bookshelf Drives

Use the procedure in this section to install the ControlNet option board in the drives
listed in table 2.6.

This procedure requires access to the right side of the drive. Remove the drive from
the panel if necessary.

!

ATTENTION: Only qualified electrical personnel familiar with the
construction and operation of this equipment and the hazards involved
should install, adjust, operate, or service this equipment. Read and
understand this manual and other applicable manuals in their entirety
before proceeding. Failure to observe this precaution could result in
severe bodily injury or loss of life.

ATTENTION: The drive is at line voltage when connected to incoming
AC power. Disconnect, lock out, and tag all incoming power to the drive
before performing the following procedure. Failure to observe this
precaution could result in severe bodily injury or loss of life.

ATTENTION: DC bus capacitors retain hazardous voltages after input
power has been disconnected. After disconnecting input power, wait five
minutes for the DC bus capacitors to discharge and then check the
voltage with a voltmeter to ensure the DC bus capacitors are discharged
before touching any internal components. Failure to observe this
precaution could result in severe bodily injury or loss of life.

ATTENTION: The drive contains ESD- (Electrostatic Discharge)
sensitive parts and assemblies. Static control precautions are required
when installing, testing, servicing, or repairing the drive. Erratic machine
operation and damage to, or destruction of, equipment can result if this
procedure is not followed. Failure to observe this precaution can result
in bodily injury.

Table 2.6 – Model Numbers for 2 to 15 Amp and 24 to 43 Amp Drives

2 to 15 Amp

24 to 30 Amp

43 Amp

31ER40xx

31ET40xx

240ER40xx

240ET40xx

430ER40xx

430ET40xx

38ER40xx

38ET40xx

300ER40xx

300ET40xx

55ER40xx

55ET40xx

85ER40xx

85ET40xx

126ER40xx

126ET40xx

150ER40xx

150ET40xx

Advertising