Figure 5.2 - rslogix 5000: new module selection – Rockwell Automation GV3000/SE AC Drive ControlNet Network Communication Board, M/N 2CN3000 User Manual
Page 74
Advertising
5-2
GV3000/SE AC Drive ControlNet Network Communication Option Board
Step 1. Right-click on the I/O Configuration folder and select New Module (figure
5.2).
Step 2. Select the ControlNet module used by the controller. In this example (figure
5.3), a 1756-CNB Series B ControlNet Bridge is selected.Click OK.
Figure 5.2 – RSLogix 5000: New Module Selection
Figure 5.3 – Select Module Type: 1756-CNB/B Selection
Advertising