Rockwell Automation GV3000/SE AC Drive ControlNet Network Communication Board, M/N 2CN3000 - Manual (Page 7)

Contents V
List of Tables
Table 2.1 – Locating the Appropriate Installation Procedure.................................... 2-1
Table 2.2 – Model Numbers for 1 to 5 HP @ 460 VAC Drives.................................... 2-4
Table 2.3 – Model Numbers for 1 to 20 HP @230 VAC Drives ................................ 2-12
Table 2.4 – Model Numbers for 30 to 100 HP @ 230 VAC and
75 to 200 HP@460 VAC Drives ............................................................. 2-16
Table 2.5 – Model Numbers for 15 to 60 HP @460 VAC Drives ............................. 2-21
Table 2.6 – Model Numbers for 2 to 15 Amp and 24 to 43 Amp Drives ................. 2-34
Table 4.1 – Network Update Time Components....................................................... 4-1
Table 4.2 – ControlNet Scheduled Traffic Configuration Information ....................... 4-2
Table 4.3 – Scheduled Drive Reference Data .......................................................... 4-3
Table 4.4 – Scheduled Drive Feedback Data ........................................................... 4-5
Table 4.5 – Signals That Can Be Displayed in Words 2 - 5...................................... 4-6
Table 4.6 – MSG Configuration Information ............................................................. 4-8
Table 6.1 – Required Software and Equipment........................................................ 6-1
Table 7.1 – File N10:X (Drive Read/Write Parameters)............................................ 7-1
Table 7.2 – File N11:X (Drive Display Data (Read Only)) ........................................ 7-6
Table 7.3 – File N12:X (Drive Reference and Feedback Data) ................................ 7-7
Table 8.1 – Health LED ............................................................................................ 8-1
Table 8.2 – Communications LEDs .......................................................................... 8-2
Table 8.3 – Communication Error Codes ................................................................. 8-2