Figure 6.4 - 1747-kfc15 set up – Rockwell Automation GV3000/SE AC Drive ControlNet Network Communication Board, M/N 2CN3000 User Manual
Page 86
Advertising
6-4
GV3000/SE AC Drive ControlNet Network Communication Option Board
In the project tree, choose Controller Properties and Controller Communications. Set
the appropriate Driver, Node and Path for Communications. The Node and Path must
be the ControlNet Mode of the 1747-KFC15 module. After applying all settings,
download to the processor.
Figure 6.3 – Controller Properties: Controller Communications
Figure 6.4 – 1747-KFC15 Set Up
Advertising