2 intended use, 3 safety instructions, 1 general notes on safety – Metrohm 896 Professional Detector – Conductivity & Amperometry User Manual

Page 10: 2 electrical safety, Intended use, Safety instructions, General notes on safety, Electrical safety

Advertising
background image

1.2 Intended use

■■■■■■■■■■■■■■■■■■■■■■

2

■■■■■■■■

2.896.0030 896 Professional Detector – Conductivity & Amperometry

bine an outstanding sensitivity with a high degree of selectivity. The instal-
led potentiostat generates the voltages for the direct current amperometry
(DC), for the pulse amperometry (PAD) and the flexible integrated pulse
amperometry (flexIPAD) as well as for the recording of cyclovoltammo-
grams. The installed preheating capillary ensures a constant eluent tem-
perature on the cell.

1.2

Intended use

The 896 Professional Detector – Conductivity & Amperometry is used as
an independent detector in an IC system. With its two different detector
types, it is used on the one hand for the precise measurement of conduc-
tivity during ion chromatography determination of anions and cations and
on the other hand for the determination of electroactive substances in the
mobile phase of an IC or general liquid chromatography system.

The present instrument is used for working with chemicals and flammable
samples. Usage of the 896 Professional Detector – Conductivity & Amper-
ometry therefore requires the user to have basic knowledge and experi-
ence in the handling of toxic and caustic substances. Knowledge with
respect to the application of the fire prevention measures prescribed for
laboratories is also mandatory.

1.3

Safety instructions

1.3.1

General notes on safety

Warning

This instrument may only be operated in accordance with the specifica-
tions in this documentation.

This instrument has left the factory in a flawless state in terms of technical
safety. To maintain this state and ensure non-hazardous operation of the
instrument, the following instructions must be observed carefully.

1.3.2

Electrical safety

The electrical safety when working with the instrument is ensured as part
of the international standard IEC 61010.

Warning

Only personnel qualified by Metrohm are authorized to carry out service
work on electronic components.

Advertising