Figure 5, Connection detector – suppressor, Figure 6 – Metrohm 896 Professional Detector – Conductivity & Amperometry User Manual
Page 25: Connection detector – mcs, 2) labeled with
Advertising
■■■■■■■■■■■■■■■■■■■■■■
3 Installation
2.896.0030 896 Professional Detector – Conductivity & Amperometry
■■■■■■■■
17
1
2
3
4
Figure 5
Connection detector – suppressor
1
Detector input capillary
2
Suppressor output capillary
labeled with out.
3
Coupling (6.2744.040)
4
PEEK pressure screws, short
(6.2744.070)
Connecting the detector input capillary to the MCS
1 Connect the detector input
■
Fasten the detector input capillary (6-1) with one long PEEK pres-
sure screw (6.2744.090) (6-2) to the output of the MCS (6-3).
3
2
1
Figure 6
Connection detector – MCS
1
Detector input capillary
2
PEEK pressure screw, long
(6.2744.090)
3
MCS output
Advertising