Metrohm 896 Professional Detector – Conductivity & Amperometry - Manual (Page 12)

1.4 About the documentation
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 ￭￭￭￭￭￭￭￭
2.896.0030 896 Professional Detector – Conductivity & Amperometry
1.3.4 Flammable solvents and chemicals
Warning
All relevant safety measures are to be observed when working with
flammable solvents and chemicals.
￭ Set up the instrument in a well-ventilated location (e.g. fume cup-
board).
￭ Keep all sources of flame far from the workplace.
￭ Clean up spilled liquids and solids immediately.
￭ Follow the safety instructions of the chemical manufacturer.
1.3.5 Recycling and disposal
This product is covered by European Directive 2002/96/EC, WEEE – Waste
from Electrical and Electronic Equipment.
The correct disposal of your old equipment will help to prevent negative
effects on the environment and public health.
More details about the disposal of your old equipment can be obtained
from your local authorities, from waste disposal companies or from your
local dealer.
1.4 About the documentation
Caution
Please read through this documentation carefully before putting the
instrument into operation. The documentation contains information
and warnings which the user must follow in order to ensure safe opera-
tion of the instrument.
1.4.1 Content and scope
This document describes the 896 Professional Detector – Conductiv-
ity & Amperometry, its assembly and connection to the IC instrument,
as well as the installation, operation and maintenance of the individual
components. Technical specifications, troubleshooting and information
concerning scope of delivery and optional accessories make up the rest of
the manual.
You will find additional information on the installation and maintenance
of the IC instrument and the Sample Processor in the respective manuals.