Metrohm 896 Professional Detector – Conductivity & Amperometry - Manual (Page 38)

4.8 Attaching the front lid
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
30 ￭￭￭￭￭￭￭￭
2.896.0030 896 Professional Detector – Conductivity & Amperometry
Note
Do not move the measuring cell for at least 5 seconds after having
inserted it.
During this time, data is read from the chip of the measuring cell
and written into the database. This process must not be interrup-
ted, because otherwise the data may be transferred incorrectly or
incompletely.
The measuring cell is now correctly connected.
4.8 Attaching the front lid
In order to obtain good measuring results, we recommend that the front
lid be put back in place.
When you are attaching the front lid, observe the following:
￭ Do not pinch any capillaries!
Guide the capillaries through the capillary feed-throughs .
￭ Do not pinch any cables!