Metrohm 896 Professional Detector – Conductivity & Amperometry - Manual (Page 22)

3.2 Mounting base tray and bottle holder (optional)
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
14 ￭￭￭￭￭￭￭￭
2.896.0030 896 Professional Detector – Conductivity & Amperometry
1 2 3
1 Place the bottle holder onto the topmost instrument in such a way
that the openings in the bottle holder exactly match the screw
threads on the top surface of the instrument.
2 Insert the two cylinder screws and tighten them with the 3 mm hexa-
gon key.
3 Insert covering stoppers.
After having attached the bottle holder, all connections which were
undone at the beginning of the process, must be reconnected. Proceed as
follows:
Restoring the loosened connections
1 Plug in the USB cable.
2 Plug in the MSB cable.
3 Plug in the mains cable.
4 Mount the drainage tubings again (see manual of the IC instrument).
Possibly, a longer section of silicone tubing (6.1816.020) must be cut
to fit and mounted (see also the manual for the IC instrument).
5 If one of the instruments in the stack is equipped with a leak sensor
connection socket, connect the leak sensor (see manual of the IC
instrument).