3 post column reactor tubing connections, Post column reactor tubing connections, Figure 18 – Metrohm 844 UV/VIS Compact IC User Manual
Page 49: Attaching the post column reactor, Holder 102, Insert post column reactor 101 in, Lder 102, R 101, Er 102, Push pcr holder 102
Advertising
2.7 Post column reactor
844 UV/VIS Compact IC / Gebrauchsanweisung 8.844.1051
37
Figure 18: Attaching the post column reactor
49 Peristaltic pump
for operating the post column reactor
101 6.2836.000 Post column reactor
102 6.2057.050 PCR holder
Holder for post column reactor
2.7.3
Post column reactor tubing connections
The connections for the column (Section 2.8) and detector (Section 2.9)
are described later. In this first step the reagent flow is connected:
1 Connect pumping tube to inlet "reagent in" 106
• Attach connection capillary 100 6.1803.050 (20 cm) to post
column reactor inlet "reagent in" 106 using a compression
fitting
64 (6.2744.010).
49
101 102
Advertising