Hardware settings – Metrohm 844 UV/VIS Compact IC User Manual
Page 82
Table of contents
Peristaltic pump
If this option is switched off the peristaltic pump
will not be switched on at
Startup hardware
or at
the start of a determination.
Reference channel
Reference
channel.
On
If this option is switched on the absorption of
the measuring and reference channels will be
shown as a comparative value.
Wavelength, nm
Sets the wavelength of the reference channel.
Bunching, nm
Sets bunching for the wavelength defined
above.
Links
The
Links
tab in the window for the system settings serves to select and
set the COM port (for details see Software Instructions for Use «IC Net
2.3», Section 5.2.4 Links).
3.3.2 Hardware
settings
Selection of the
Hardware
menu item using the right mouse button
opens the hardware settings window consisting of the four tabs
Outputs
,
Alarm stops
,
System settings
and
Detector settings
.
Outputs
The
Outputs
tab of the hardware settings window defines remote output
signals to be set automatically if specific events occur.