Metrohm 844 UV/VIS Compact IC - Manual (Page 73)

3.2 Measuring operation
844 UV/VIS Compact IC / Gebrauchsanweisung 8.844.1051
61
Assign data sources
A data source is assigned to each of these data recorders. Click on one
of the data recorders with the right-hand mouse key, and select
Setup .
The RECORDER window opens.
Click on the lower <choose> button. The DATA SOURCE window opens.
Select one of the data sources that has not been previously connected,
and draw it on to the right-hand side by keeping the left-hand mouse
key pressed down:
Click on <OK> . The connected data source is shown in the RECORDER
window:
Click on
<OK>
and assign a data source to each data recorder.
3.2.3 Connect a system
The selected system must be linked to the workplace for controlling the
instrument and starting determination processes. Systems are linked by
selecting
SYSTEM / Control / Connect to workplace (see also Software
Instructions for Use «IC Net 2.3», Section 4.3.1).