Sindoh M403 - Manual (Page 124)

Scanner, Printer and Fax
3-
42
Delay Tx
You can send the document at the designated time without sending it instantly. When it becomes
the designated time, the document saved on the memory is automatically sent.
1
Place the original. Before switching to the fax mode, press the 【MENU】 to set resolution and
density.
① Press the 【FAX】 button to the left of the LCD to go to the fax mode, and then press the
【◀】 or 【▶】 button until [Tx Mode] appears. Press the 【OK】 button.
② Press the 【◀】 or 【▶】 button until [Delay Tx] appears.
③ Press the 【OK】 button to turn on the function.
2
Use the number pad, speed dial or address book to enter the number, and the press the 【OK】
button. Enter the number in the same way as Broadcast Tx.
3
Press the 【◀】 or 【▶】 button to go to the field and use the number pad to enter the time.
The time format is [HH: MM]. If the time is behind the current time, the document is faxed on this
day. If the time is ahead of the current time, the document is faxed on the next day.
Caution
- You can designate the time within 24 hours from the current time.
4 Press the 【 】 button.
5
Scan the original to save it on the memory. When it becomes the designated time, the fax is
sent.
11 x 17 Tx
You can scan the 11 x 17 document to send it.
All steps are the same as above transmission modes. However, in the last step, press the
【A3/11 x 17 START】 button to the left of the LCD instead of the 【 】 button.