Sindoh M403 - Manual (Page 156)

Settings of Each Function
4-
28
Tx/Rx Reports
You can print the Tx/Rx report with the number of faxed pages, communication mode and others.
Manual Printing
1
Go to 【MENU】 [Reports] [Fax Tx/Rx Reports].
2
Press the OK button to print out the report.
Automatic Printing
You can automatically print the Tx/Rx report according to your settings.
1
Go to 【MENU】 [Settings] [FAX Reports Setup] [Tx/Rx Report].
2
Press the ◀ or ▶ button to set your settings.
3
Press the OK button to apply the setting.
Always ON The report is printed whenever any communication event occurs.
On Error The report is printed whenever any error occurs.
Only Tx The report is printed whenever any Tx event occurs.
Only Rx The report is printed whenever any Rx event occurs.
Tx/Rx The report is printed whenever any Tx or Rx event occurs.
OFF The report is not printed automatically.