Sindoh M403 - Manual (Page 47)

1-
19
Preparation for Using the Device
1
Important
- Do not overload paper in the tray. This may cause jammed paper.
6
Load the paper in a way its print side is facing downward.
7
Load paper to the limit mark.
Caution
- For label paper, thick paper and other paper smaller than A5, load it to the Thick mark.
8
Hold both width guide tab and width guide, and then push them to the end of paper.
9
Hold both length guide tab and length guide, and then push them to the end of paper.
10
Push back the tray to the device.