Cable connection, Usb cable connection, Network cable connection – Sindoh M403 User Manual
Page 57
1-
29
Preparation for Using the Device
1
13. Cable Connection
The device can be directly connected to the PC via the USB cable.
Caution
- While the device is on, do not connect or disconnect any communication ports.
USB Cable Connection
The device can be connected via the USB cable and its USB port supports the USB standard.
1
Check if the other equipments connected to the device is off.
2
Connect the device to the PC via the USB cable. The USB port needs the USB cable.
Check if the symbol on the device matches that on the cable.
Network Cable Connection
This device can be directly connected to the network via the standard network cable.
Follow below instructions to connect the device to the network.
Note
- Most networks has the 10BaseT/100BaseTX Fast Ethernet port.
1
Check if the other equipment connected to the device is off.
2
Use the standard cable compatible with the user network to connect the device to the LAN or
hub.