Sindoh M403 - Manual (Page 41)

1-
13
Preparation for Using the Device
1
6. Unpacking
1
Unpack and install the device where good ventilation is provided.
To enable the cooling fan to operate properly, do not place anything 3 cm away from the right
side of the device. Avoid following locations:
A. Exposed to the direct sunray
B. Close to heating equipment or air-conditioner
C. Dusty place
2
Pull out the device and other components from the box.
Keep the box and buffer materials in case you need to pack the device.
3
Remove tapes in and on the device and remove the packing material from the tray.
4
Check if following components are included.
1. Tray 1 (250 sheets by default)
3. Power Cord
2. Enclosed Cartridge
4. USB Cable
5. Quick Installation Manual
6. Driver CD
(User Manual CD Included)
7. Paperport CD
8. Telephone Line
9. Warranty Sheet
Note
- Above picture is a power cord for 220v, 110v power cord will be enclosed to the locations,
where do not use 220v.
5
If any of components are missing or damaged, contact the dealer where you purchase the
device.