Sindoh M403 - Manual (Page 161)

4-
33
Settings of Each Function
4
Wired Network Setting
First, you have to set the IP address for network print and control. The DHCP server automatically
can allocate or fix the IP. Also, the IP address can be manually set.
Note
- Use the “SINDOH Network Printer Setup” program to set the IPv6 address.
Using the control panel
1
When the device is ready, press the 【MENU】 button.
2
Press the ◀ or ▶ button until [settings] appear, and then press the 【OK】 button.
3
Press the ◀ or ▶ button to go to [Network Settings] -> [Wired Network] ->
[Setup IP Address], and then press the 【OK】 button.
4
① IP Automatic Setting: Select [DHCP], and then press the 【OK】 button.
② IP Manual Setting: Select [Static] to type in the IP address, netmask and gateway, and then
press the 【OK】 button.
Note
- Use the “SINDOH Network Printer Setup” program to set the IPv6 address.
IP Manual Setting
Follow below instructions to enter the IP address.
① Press the 【MENU】 button, press the ◀ or ▶ button to go to [Network Settings] ->
[Wired Network] or [Wifi Network] -> [Setup IP Address], and then select [Static].
Enter IP Address
0 . . .
② In the above screen, use the number pad or ◀ ▶ buttons.
③ Press the 【OK】 button to show the current values and move to the next step.
Enter IP Address
010. . .