Sindoh M403 - Manual (Page 202)

Maintenance and Troubleshooting
5-
30
5 Close the front cover.
Important
- If you cannot remove the jammed paper with above steps:
A. The fusing unit may have jammed paper. In this case, follow below steps.
(1) Pull down the display unit.
(2) While pressing the display unit, remove the jammed paper.
(3) Check if the display unit returns to its original position.
Caution
- If you pull down the display unit, the inside of the device is hot.
If possible, use the tweezers rather than your hands to remove jammed paper.
106 Paper Jam (Back Feeder Cover)
Open the front cover and the back feeder cover.
For the jammed paper which does not leave the flatbed, see removal of jammed paper visible from
the flatbed.
For the jammed paper which does not reach the feeder, see removal of jammed paper invisible from
the flatbed.
Removal of The jammed paper Visible From The Flatbed
1 Pull out the jammed paper.
2 If it is not easy to pull out the jammed paper, see removal of jammed paper invisible from the
flatbed.