Sindoh M403 - Manual (Page 75)

2-
7
Copy
2
6
Press the 【◀】 or 【▶】 button to select the tray, and then press the 【OK】 button.
7
Press the 【◀】 or 【▶】 button until [Paper Size] appears, and then press the 【OK】 button
8
Press the 【◀】 or 【▶】 button to select the paper size, and then press the 【OK】 button
Note
- [Paper Size] appears only when Tray 1, Tray 2 or MPT is selected for [Paper Source].
9
Select reduction/enlargement settings. If they are not selected, copies are automatically
reduced or enlarged according to the size of the original and paper.
10
Enter the number of copies.
11
Press the 【 】 button to start copying.
Copy Mode and Density
Set the copy mode and density according to the structure and content of the original.
1
Press the 【COPY】 button to go to the copy mode setting menu.
2
Press the 【◀】 or 【▶】 button until [Contrast] appears, and then press the 【OK】 button.
[Text] - Suitable for text documents.
[Text/Photo] - Suitable for documents with texts and images.
[Photo] - Suitable for photo documents
3
The selected paper type is set.
Darkness/Brightness/Contrast/Background Remove
1
Press the 【◀】 or 【▶】 button until [Darkness]/[Brightness]/[Contrast]/[Background Remove]
appears, and then press the 【OK】 button.
2
Press the 【◀】 or 【▶】 button to select the desired value, and then press the 【OK】 button.