Sindoh M403 - Manual (Page 136)

Settings of Each Function
4-
8
4. Scan
You can select the default scan setting when you do the scan job with the USB memory.
The default setting is the setting that you don’t change by pressing the【SCAN】button.
When you do the scan job with the PC, settings are subject to the scan driver.
Setting
1
Press the 【MENU】 button.
2
Press the ◀ or ▶ button until [Scan Settings] appears, and then press the 【OK】 button.
3
Press the ◀ or ▶ button to go to the wanted item, and then press the 【OK】 button.
Each menu item has a list of various values which consist of descriptive words, number or
On/Off.
4
When you make wanted settings, press the 【 】 button to go to the [Ready] mode.
The default setting is used until you save new settings, or when you reset the scan setting.
Change settings to your environments.
Scan Setting Table
Scan Settings
Where to scan
Original Size
Color
Resolution
File Format
JPEG Quality
Brightness
Contrast