Sindoh M403 - Manual (Page 139)

4-
11
Settings of Each Function
4
6. General Settings
You can change general function settings to control the MFP.
General Setting Table
General Settings
Power Save
Buzzer
Language
Factory Defaults
Setup ReadyMsg
Detailed Description of General Settings
Setting Description Value
Power Save Time to enter the Energy Saver
Mode (Minutes) 0(Disable)~ 240 (0 means “Not
Used”.)
Buzzer Sound on/off when pressing the
button * off, on
Language Language for the control panel Korean, * English
Factory Defaults Reset to factory settings * No, Yes
Setup ReadMsg Value for the standby screen None, * Simple, Detail
( * ) is Factory setting
Reset to Factory Settings
To reset the current settings to the factory default settings, select the factory setting menu from the
general setting menu, and follow the steps described below: .
1
Press the 【MENU】 button.
2
Press the ◀ or ▶ button until [Settings] appears, and then press the 【OK】 button.
3
Press the ◀ or ▶ button until [General Settings] appears, and then press the 【OK】 button.